Onkyo HTP-360 Connecting Your Speakers-Continued, Wall Mounting, Using Speaker Mounts/Brackets

Connecting Your Speakers—Continued

Wall Mounting

The speakers can easily be wall mounted by using the keyhole slots. To prevent the speaker from vibrating against the wall, attach two of the supplied thick rubber stoppers to the rear of each speaker.

To mount the front or surround speakers vertically, use the keyhole slot shown to hang each speaker on a screw that’s securely screwed into the wall.

HTP-360 Front/Surround speakers (SKF-360F/SKM-360S)

Keyhole slot for wall mounting

Thick rubber stoppers

HTP-318 Front/Surround speakers

Use screws with a head diameter of 5/16" (9 mm) or less and a shank diameter of 1/8" (4 mm) or less. With hollow walls, use a cable/pipe detector to check for any power cables or water pipes before making any holes.

Leave a gap of between	Wall
3/16" (5 mm) and 7/16"
(10 mm) between the wall
and the base of the screw
head, as shown.
(We recommend that you
consult a home installa-	3/16" – 7/16"
tion professional.)
	(5 mm) – (10 mm)

Using Speaker Mounts/Brackets

Threaded inserts for machine screws are provided on the rear of each speaker for wall-mounting with commer- cially available speaker mounts or brackets. North American models require 1/4-inch screws. Other models require M5 (5 mm) screws. Refer to the manual supplied with your mounts or brackets for installation details.

(SKF-318F/SKM-318S)

Thick rubber stoppers

Keyhole slot for wall mounting

Threaded insert Threaded

insert

Threaded insert

To mount the center speaker horizontally, use the two keyhole slots shown to hang each speaker on two screws that are securely screwed into the wall.

Center speaker (SKC-360C/SKC-318C)

Keyhole slots for wall mounting

Thick
rubber	8-9/16" (217 mm)
stoppers

Caution:

A mounting screw’s ability to support a speaker depends on how well it’s anchored to the wall. If you have hollow walls, screw each mounting screw into a stud. If there are no studs, or the walls are solid, use suitable wall anchors.

Note:

•The portion of the screw that goes into the speaker’s threaded insert should be between 1/4" – 5/16" (5 mm

– 8 mm) long.

Mount or bracket

1/4" (North American model) 5 mm (Other models)

1/4" – 5/16"

(5 mm) – (8 mm)

22