Onkyo HT-S3100 Adjusting the Listening Modes, Using the Audio Adjust Functions, Setup closes

Adjusting the Listening Modes

ON/STANDBY

REMOTE MODE

		RECEIVER	DVD	RECEIVER
		TAPE
INPUT SELECTOR
1	2	3	CD
V1	V2	V3
4	5	6	MD
	MULTI CH	DVD
7	8	9	CDR
TAPE	TUNER	CD
+10	0	CLR	HDD
--/---	DIMMER	SLEEP
		CH	VOL
		DISC

2

ENTER

Use the Up and Down []/[ ] buttons to select “4. Audio Adjust,” and then press the [ENTER] button.

		ALBUM
TOP MENU			MENU
SP A / B			MUTING
ENTER	ENTER
PLAYLIST			PLAYLIST
RETURN				SETUP
RETURN			SETUP
	LISTENING MODE
STEREO	SURROUND
AUDIO SUBTITLE RANDOM REPEAT
TEST TONE	CH SEL	LEVEL-	LEVEL+
PLAY MODE				CINE FLTR
DISPLAY	OR-EQ	L NIGHT	CINE FLTR

L NIGHT

RC-646S

Using the Audio Adjust Functions

Some functions are not available with all speaker config- urations.

Audio Adjust provides various functions for adjusting the sound.

1		Press the [RECEIVER] button fol-
	RECEIVER	lowed by the [SETUP] button.

SETUP

3	Use the Left and Right [ ]/[ ]
	buttons to change the settings.

Press the Down [ ] button to select the next setting.

4	Repeat step 3 to complete all set-
	tings.
5	Press the [SETUP] button.
	Setup closes.
	When you want to go back up one
SETUP	menu level to “Audio Adjust,” press the
	[RETURN] button.

The Audio Adjust functions are explained below.

Input Channel Settings

■Multiplex

This setting determines which channel is output from a stereo multiplex source. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on.

Main: The main channel is output (default). Sub: The sub channel is output.

M/S: Both the main and sub channels are output.

■Mono (2ch)

This setting determines which channel is output when the Mono listening mode is used with a stereo source.

L+R: Both the left and right channels are output (default).

L:Only the left channel is output.

R:Only the right channel is output.

51