Advanced Setup—Continued
Speaker Levels
With this function, you can adjust the volume of each speaker so that all speakers can be heard equally at the listening position.
The speaker levels cannot be adjusted while a pair of headphones is connected, speaker set B is on, or the AV receiver is muted.
1 |
| Press the [RECEIVER] button fol- |
RECEIVER | lowed by the [SETUP] button on | |
|
| |
|
| the remote controller. |
| SETUP |
|
2 |
| Use the Up and Down [ ]/[ ] |
buttons to select “3. Level Cal,” and then press the [ENTER] but- ton.
A pink noise test tone is output by the front left speaker.
ENTER
3 | Turn up the volume so that you | ||
| |||
| can hear the test tone suffi- | ||
| ciently. | ||
| While each speaker outputs the test | ||
| tone, its name appears on the display, as | ||
| shown. | ||
|
|
|
|
|
|
|
|
|
|
|
|
4 | Use the Left and Right [ | ]/[ ] |
| buttons to adjust the speaker | |
| level, and use the Down [ | ] but- |
| ton to select the next speaker. | |
The level can be adjusted from
5 | Repeat step 4 so that the level of |
| |
| the test tone from each speaker |
| is the same. |
| Speakers that you set to No or None in |
| the Speaker Configuration (page 52) do |
| not output the test tone. |
|
|
6 | Press the [SETUP] button. |
| |
| Setup closes. |
| Don’t forget to turn down the volume if |
SETUP | you turned it up while setting the levels. |
| When you want to go back up one |
| menu level to “Level Cal,” press the |
| [RETURN] button. |
|
|
Note:
•A quicker way to adjust the speaker levels is to press the remote controller’s [TEST TONE] button to output the test tone, use the
•If the multichannel input is selected (page 37), in step 2, the “3. MultiLevel” menu appears instead of the “3. Level Cal” menu, and you can adjust the level of each channel of the multichannel input regardless of the Speaker Configuration settings.
You can adjust the volume of each speaker from – 12 dB to +12 dB
51
