Front & Rear
Rear Panel
1 | B | 3 | 4 | 5 | 6 |
|
|
7 | 8 9 |
| J | K | L | M | N |
A DIGITAL IN OPTICAL 1, 2, 3 & COAXIAL |
| I TAPE IN/OUT |
|
|
These optical and coaxial jacks can be used to con- nect a CD or DVD player and other components with digital audio outputs.
BCOMPONENT VIDEO
A DVD player, TV, or other component that sup- ports component video can be connected here.
CAM ANTENNA
These push terminals are for connecting an AM antenna.
DFM ANTENNA
This jack is for connecting an FM antenna.
EMONITOR OUT
The
FFRONT SPEAKERS B
These push terminals are for connecting speaker set B.
G
This (Remote Interactive) jack can be con-
nected to the jack on another Onkyo compo- nent. The AV receiver’s remote controller can then
be used to control that component. To use , you must make an analog audio connection (RCA) between the AV receiver and the other component, even if they are connected digitally.
Note:
can only be used with Onkyo components.
HCD IN
These analog inputs and outputs can be used to con- nect a cassette recorder, MiniDisc recorder, or other recorder with analog inputs and outputs.
JVIDEO 1 IN/OUT & VIDEO 2 IN
The VIDEO 1
KDVD IN/MULTI CH INPUT
The FRONT, SURROUND, CENTER, and SUB- WOOFER jacks can be used to connect a compo- nent with an analog multichannel audio output, such as a DVD player with a
LSUBWOOFER PRE OUT
A powered subwoofer can be connected here.
MFRONT SPEAKERS A, SURROUND SPEAKERS, CENTER SPEAKER & SURROUND BACK SPEAKERS
These terminal posts are for connecting speaker set A.
NAC OUTLET
This switched AC outlet can be used to supply power to another component. The connector type depends on the country in which you purchased your AV receiver.
These analog inputs can be used to connect a CD player with analog outputs.
See pages
10