Onkyo HT-S780 instruction manual Speaker Configuration

Advanced Setup—Continued

Speaker Configuration, Crossover Frequency, 4

and Double Bass settings only need to be changed if you’re not using the speakers in this package.

Speaker Configuration
This section explains how to specify which speakers are
connected and their sizes.
For speakers with a cone diameter
larger than 6-1/2 inches (16 cm),
specify Large. For those with a
smaller diameter, specify Small.	5
Cone diameter

1Press the [RECEIVER] button fol-

lowed by the [SETUP] button.

2	Use the Up and Down [ ]/[ ]
	buttons to select “1. Speaker

Config,” and then press the	6
[ENTER] button.

3While the Subwoofer setting is

selected, use the Left and Right []/[ ] buttons to select Yes or No.

Yes: Select if a subwoofer is con- nected.

No: Select if no subwoofer is con- nected.

Use the Down [ ] button to select “Front,” and then use the Left and Right []/[ ] buttons to

select Small or Large.

Small: Select if the front speakers are small.

Large: Select if the front speakers are large.

Note:

• If the Subwoofer setting in step 3 is set to No, this setting is fixed at Large and does not appear.

Use the Down [ ] button to select “Center,” and then use the Left and Right []/[ ] buttons to

select Small, Large, or None.

Small: Select if the center speaker is small.

Large: Select if the center speaker is large.

None: Select if no center speaker is connected.

Note:

•If the Front setting in step 4 is set to Small, the Large option cannot be selected.

Use the Down [ ] button to select “Surround,” and then use the Left and Right []/[ ] but- tons to select Small, Large, or None.

Small: Select if the surround speak- ers are small.

Large: Select if the surround speak- ers are large.

None: Select if no surround speakers are connected.

Note:

•If the Front setting in step 4 is set to Small, the Large option cannot be selected.

48