Connecting to the ONKYO Separate Collection Series components
Connecting to the audio connector
Before connecting
•Do not connect the unit’s AC power cord (mains lead) to a wall outlet (the mains) until you
have completed all the other connections, including 
and AC OUTLET connections on page 12 and “Connecting speaker systems” on page 16.
•On each pair of connectors, a red connector (marked R) corresponds to the right channel, and a white connector (marked L) to the left channel. Connect white plugs of audio con- nection cables to L connectors and connect red plugs of audio connection cables to R con- nectors.
•Please refer to the instruction manual for each component when you make any connec- tions.
|
| Audio connection |
|
|
| cable |
|
To L connector | (White) | (White) | To L connector |
To R connector | (Red) | (Red) | To R connector |
•Insert the plug securely. If the connection is incomplete, noise or malfunction may result. Improper connection
Insert completely
•When you use a digital audio optical cable, do not bend it sharply nor coil it tightly.
•Bundling an audio connection cable with the power cord or speaker cord may degrade the sound quality.
•Be sure to use the 
cable, supplied with each component (except for the
connect to the 
remote control connector. If the connection is incomplete, you will be unable to operate the device using the remote controller.
•CD players and MD recorders use
Note:
To connect both the MD recorder
Connect the MD recorder to the unit following the “Connections for combination example 2” on the next page and connect the stereo cassette tape deck to the unit following the “Con- nections for combination example 1.”
The European model is shown in the following illustrations.
10