Onkyo RC-391M manual Press the Macro Direct button again

Using a Macro function

38

1, 2 1

1, 2 1

Erasing a learned remote controller button oper- ation from the MACRO MODE buttons

1.Press and hold down the corresponding MODE button and press the MACRO MODE button, then release the buttons. When you press the MODE button, the SEND/LEARN indica- tor lights up. When you press the MACRO MODE button, the indicator turns off. When you release the buttons, the indicator flashes once.

2.Press the MACRO MODE button again.

The SEND/LEARN indicator flashes twice slowly. The learned operation is erased.

Erasing a learned remote controller button oper- ation from the MACRO DIRECT button

1.Press and hold down any one of the MODE buttons and press the MACRO DIRECT button. Then release the but- tons.

When you press the MODE button, the SEND/LEARN indica- tor lights up. When you press the MACRO DIRECT button, the indicator turns off. When you release the buttons, the indicator flashes once.

2.Press the MACRO DIRECT button again.

The SEND/LEARN indicator flashes twice slowly. The learned operation is erased.

Note:

•If you do not press any button for more than 30 seconds, the SEND/LEARN indicator flashes three times quickly, then the RC-391M exits Learning mode. Resume Step 1.

•If you press a wrong button in Step 2, you may have overwritten the memory of the button you pressed.