Advanced
Speaker Configuration, Crossover Frequency, and Double Bass settings only need to be changed if you’re not using the speakers in this package.
These settings cannot be changed while head- phones are connected, speaker set B is on, or the multichannel DVD input is being used.
Speaker Configuration
This section explains how to specify which speakers are connected and their sizes.
For speakers with a cone diameter
larger than
with a smaller diameter, specify
Small (default crossover 100 Hz). The crossover frequency can be
changed on page 55.
1 | Press the [RECEIVER] button fol- |
| |
RECEIVER | lowed by the [SETUP] button. |
| SETUP |
2 | Use the Up and Down [ ]/[ ] |
buttons to select “1. SP Config,” and then press the [ENTER] but- ton.
3 | While the Subwoofer setting is |
| |
| selected, use the Left and Right |
| [ ]/[ ] buttons to select Yes or |
| No. |
| Yes: Select if a subwoofer is con- |
| nected. |
| No: Select if no subwoofer is con- |
| nected. |
4
5
6
Use the Down [ ] button to select “Front,” and then use the Left and Right []/[ ] buttons to
select Small or Large.
Small: Select if the front speakers are small.
Large: Select if the front speakers are large.
Note:
• If the Subwoofer setting in step 3 is set to No, this setting is fixed at Large and does not appear.
Use the Down [ ] button to select “Center,” and then use the Left and Right []/[ ] buttons to
select Small, Large, or None.
Small: Select if the center speaker is small.
Large: Select if the center speaker is large.
None: Select if no center speaker is connected.
Note:
•If the Front setting in step 4 is set to Small, the Large option cannot be selected.
Use the Down [ ] button to select “Surround,” and then use the Left and Right []/[ ] but- tons to select Small, Large, or None.
Small: Select if the surround speak- ers are small.
Large: Select if the surround speak- ers are large.
None: Select if no surround speakers are connected.
Note:
•If the Front setting in step 4 is set to Small, the Large option cannot be selected.
54