Digital Input Signal Formats

Advanced Setup—Continued

The following table shows the display indicator for each digital signal format.

Format	Display

Dolby Digital
Dolby Digital


DTS
DTS


PCM		PCM

Normally, the AV receiver detects the signal format auto- matically. However, if you experience either of the fol- lowing issues when playing PCM or DTS material, you can specify the signal format as either PCM or DTS:

•If the beginnings of tracks from a PCM source are cut off, try the PCM setting.

•If noise is produced when fast forwarding or reversing a DTS CD, try the DTS setting.

MASTER VOLUME

TUNING

PRESET

STANDBY/ON

STANDBY

ENTER

MULTI CH

DVD

VIDEO 1

VIDEO 2

VIDEO 3

TAPE

TUNER

C D

RETURN

SETUP

VCR

VIDEO 3 INPUT

PHONES

VIDEO

L AUDIO

SPEAKERS

TONE

STEREO

LISTENING MODE

DISPLAY

DIGITAL

DIMMER MEMORY

TUNING

INPUT

MODE

DIGITAL INPUT

Correcting Sound and Picture Sync

When using progressive scanning on your DVD player, you may ﬁnd that the picture and sound are out of sync. With this setting, you can correct this by delaying the audio signals. You can set it from 0 to 100 milliseconds (ms) in 20 millisecond steps.

ON/STANDBY

REMOTE MODE

			RECEIVER	DVD	RECEIVER
			TAPE
	INPUT SELECTOR			M D/CDR
INPUT	1	2	3	CD
INPUT	V1	V2	V3	HDD
SELECTOR	V1	V2	V3
SELECTOR	4	5	6	T V
	MULTI CH		DVD
	7	8	9	VCR
	TAPE	TUNER	CD	CABLE
	10	11	12	CABLE
	+10	0	CLR	SAT
	D TUN	ENT
	--/---	DIMMER	SLEEP
	TV	VOL	CH	VOL
	TV	VOL	DISC	VOL
			ALBUM
	INPUT
	GUIDE			PREVIOUS
	TOP MENU			MENU
	SP A / B			MUTING
		ENTER
	PLAYLIST/CAT		PLAYLIST/CAT
	RETURN			SETUP

1	Press the [RECEIVER] REMOTE
	Press the [RECEIVER] REMOTE
RECEIVER	MODE button.

1	Press and hold the AV receiver’s [DIGITAL
	INPUT] button for about 3 seconds.

2	While “Auto” is displayed (about 3 sec-
	onds), press the [DIGITAL INPUT] button

repeatedly to select: PCM, DTS, or Auto.

PCM: Only PCM format input signals will be heard. If the input signal is not PCM, the PCM indicator will ﬂash and there will be no sound.

1 2 3

V1 V2 V3

DVD

Press and hold, for more than 4 seconds, the input selector but- ton for the input source that you want to correct.

This can be the [DVD], [VIDEO 1], [VIDEO 2], or [VIDEO 3] input source.

DTS: Only DTS format input signals will be heard. If the input signal is not DTS, the DTS indicator will ﬂash and there will be no sound.

Auto (default): The format is detected automati- cally. If no digital input signal is present, the corresponding analog input is used instead.

3 Use the Left and Right []/[ ] buttons to adjust the delay from 0 to 100 milliseconds in 20 milli- second steps.

Note:

•This setting is not available when the Pure Audio lis- tening mode is used, or the Direct listening mode is used with an analog input signal.

HT-S790, SKW-540, SKM-540S, SKB-540, SKF-540F specifications

Onkyo, a renowned name in the audio equipment industry, has consistently delivered high-quality speakers and home theater systems, and the SKF-540F, SKW-540, SKB-540, SKM-540S, and HT-S790 are no exceptions. These models showcase an impressive combination of performance, design, and innovative technology, appealing to both audiophiles and casual listeners alike.

The Onkyo SKF-540F speakers are floor-standing models that emphasize clarity and depth in sound. They feature a two-way design that includes a high-frequency tweeter and a robust woofer, providing a well-balanced audio experience. With a frequency response ranging from 30 Hz to 120 kHz, these speakers can deliver deep bass and clear highs, making them suitable for a variety of music genres and movie soundtracks.

Complementing the SKF-540F is the SKW-540 subwoofer. This powered subwoofer features a front-firing design and a large driver, allowing it to produce powerful low frequencies that enhance the overall audio experience. The adjustable low-pass filter and phase control further allow users to tailor the bass response to their room acoustics, ensuring optimal performance.

The Onkyo SKB-540 is an ideal addition for those who seek a compact yet powerful surround sound experience. These bookshelf speakers are versatile, capable of functioning as front, rear, or even satellite speakers. Despite their smaller size, they incorporate advanced technologies such as nonlinear distortion correction, ensuring a clean and clear sound profile that stands out even in larger setups.

For those seeking a surround sound solution, the SKM-540S offers wall-mountable satellite speakers designed to be part of a complete home theater system. These speakers provide an expansive soundstage and immersive audio experiences, making action-packed movies and music more enjoyable.

At the heart of the home theater setup is the Onkyo HT-S790, a comprehensive 5.1-channel receiver system. This system is equipped with advanced surround sound decoding technology, such as Dolby Atmos and DTS:X, allowing for an enveloping audio experience. Additionally, it supports a wide range of connectivity options, including HDMI inputs and wireless capabilities, making it easy to integrate with various media sources.

In summary, the Onkyo SKF-540F, SKW-540, SKB-540, SKM-540S, and HT-S790 together create a robust audio environment that showcases Onkyo's dedication to quality sound and innovative technology. Whether for music or films, these products provide an exceptional auditory experience that enhances any home entertainment setup.

Onkyo SKB-540, SKF-540F, SKM-540S Digital Input Signal Formats, Correcting Sound and Picture Sync

Models: HT-S790 SKW-540 SKM-540S SKB-540 SKF-540F

Advanced Setup—Continued