Onkyo instruction manual SKF-4600 SKS-4600, Speaker System, Before using this unit

Models: SKS-4600

1 4
Download 4 pages 63.81 Kb
Page 1
Image 1
Speaker System

Speaker System

SKF-4600 SKS-4600

Instruction Manual

Thank you for your purchase of the Onkyo speaker system.

Please read this manual thoroughly before using it. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new speaker system.

Please retain this manual for future reference.

Before using this unit

The speaker cabinet is made of wood and is therefore sensitive to extreme temperatures and humidity. Avoid placing the speaker systems in locations subjected to direct sunlight, or in smoky or in humid places, such as near an air conditioner, humidifier, bathroom, or kitchen. Doing so may result in damage to the speaker.

Place the unit on a rigid, level surface. Placing it on a slanted surface or weak base not only may cause the unit to fall, but also results in decreased sound quality.

Be sure to turn off your amplifier before connecting the speaker system. Connecting them with the amplifier's power on may result in damage to the amplifier or the speaker system.

Keep water or other liquids away from the unit. If water is spilled into the unit, not only the unit but also the speakers themselves may be damaged.

Precaution on use

This speaker system can handle the specified input power when it is used for ordinary music reproduction. If the following abnormal signals are fed to the speaker, however, an overcurrent may flow in the internal circuits, causing burning or breakage of the wires even if the input power is below the specified rating.

1.Noise produced when FM station is not tuned in

2.Sound produced when fast-forwarding cassette tape deck

3.High-frequency sound generated by an oscillator, an electronic musical instruments, etc.

4.Oscillating amplifier signals

5.Special test signals produced by audio checking CD, etc.

6.Sound produced when connecting or disconnecting audio connection cables (Always turn off the amplifier’s power before connecting or disconnecting cables.)

7.Howling when a microphone is used

Do not place magnetic objects such as screwdrivers and iron parts near the tweeter since they use speakers with strong magnets. Otherwise, the objects may be attracted, causing injury or damaging the diaphragm.

En

Page 1
Image 1
Onkyo instruction manual SKF-4600 SKS-4600, Speaker System, Before using this unit, Precaution on use