Onkyo HTP-240 Troubleshooting, Symptom, Possible cause, Remedy, from certain speakers?, turn on?

Models: HTP-240 SKS-HT240

1 12
Download 12 pages 29.29 Kb
Page 11
Image 11
Troubleshooting

HTP-240.fm Page 11 Wednesday, December 3, 2003 9:30 AM

Troubleshooting

Symptom

Possible cause

Remedy

 

 

 

 

The speaker cables are not connected properly.

Check the speaker cables and correct as necessary.

 

 

 

 

HTP-240:The number of speaker channels is

Set the number of speaker channels to 5ch.

There’s no sound coming

not set to 5ch on the DR-S2.2.

 

 

 

SKS-HT240:On the amp or receiver, the

Check the Speaker Configuration settings and

from certain speakers?

 

Speaker Configuration settings for those

make sure that the speakers are set to something

 

speakers are set to either None or No. Or, the

other than None or No. Or set the number of

 

number of speaker channels is not set to 6ch.

speaker channels to 6ch.

 

 

 

The subwoofer does not

The power plug is not fully inserted into the

Insert the power plug fully into the wall outlet.

turn on?

wall outlet.

 

 

 

 

 

The OUTPUT LEVEL control is set to mini-

Turn up the OUTPUT LEVEL control.

 

mum.

 

 

 

 

 

The RCA cable is not properly connected to

Make sure that the RCA cable is properly con-

 

the subwoofer’s LINE INPUT.

nected to the subwoofer’s LINE INPUT.

 

 

 

The subwoofer produces

The level of the input signal was too low and

Slightly increase the subwoofer preout output level

the subwoofer entered Standby mode.

on your amp.

no sound?

 

 

HTP-240:On the DR-S2.2 Receiver, the sub-

Set the subwoofer mode to something other than

 

 

woofer mode is set to SW Off.

SW Off.

 

 

 

 

SKS-HT240:On your amp or receiver, the

Check the settings on your amp or receiver.

 

speaker setting is set to Subwoofer No, or the

 

 

subwoofer mode is set to Subwoofer Off.

 

 

 

 

The subwoofer produces

The source material contain little or no bass

Choose source material with more bass content.

hardly any sound?

content.

 

 

 

 

 

The RCA cable is not properly connected to

Make sure that the RCA cable is properly con-

A humming sound can be

the subwoofer’s LINE INPUT.

nected to the subwoofer’s LINE INPUT.

heard from the sub-

External interference from a TV or other elec-

Move the subwoofer and RCA cable away from the

woofer?

tronic device is being picked up.

interference source. Make sure your audio system

 

 

is grounded properly.

 

 

 

11

Page 11
Image 11
Onkyo HTP-240 Troubleshooting, Symptom, Possible cause, Remedy, from certain speakers?, The subwoofer does not, turn on?