Onkyo TX-8011 Playing Your Components-Continued, Using the Sleep Timer, Using Headphones

TX-8011_E.book Page 18 Friday, July 30, 2004 10:33 AM

Playing Your Components—Continued

Using the Sleep Timer

With the sleep timer, you can set the TX-8011 so that it automatically turns off after a specified period.

1

SLEEP

Press the remote controller’s [SLEEP] button repeatedly to select the required sleep time.

You can set the sleep time from 90 to 10 minutes in 10-minute steps.

The SLEEP indicator appears on the display when the sleep timer has been set, as shown. The specified sleep time appears on the display for about five seconds, then the previous display reappears.

SLEEP indicator

SLEEP

MIN

To cancel the sleep timer, press the remote controller’s [SLEEP] button repeatedly until the SLEEP indicator disappears.

To check the remaining sleep time, press the remote controller’s [SLEEP] button. Note that if you press the [SLEEP] button while the sleep time is being displayed, you’ll shorten the sleep time by 10 minutes.

Using Headphones

You can connect a pair of stereo headphones (1/4-inch phone plug) to the TX-8011’s PHONES jack as shown.

Notes:

•Always turn down the volume before connecting your headphones.

•The speakers are not automatically muted when the headphones are connected, but they can be turned off with the SPEAKERS A and B buttons.

18