PORTABLE CART WARNING

TX-8011_E.book Page 2 Friday, July 30, 2004 10:33 AM

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

 

AVIS

RISK OF ELECTRIC SHOCK

 

RISQUE DE CHOC ELECTRIQUE

DO NOT OPEN

 

NE PAS OUVRIR

 

 

 

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safeguards

1.Read Instructions—All the safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions—The safety and operating instructions should be retained for future reference.

3.Heed Warnings—All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions—All operating and use instructions should be followed.

5.Cleaning—Unplug the appliance from the wall out- let before cleaning. The appliance should be cleaned only as recommended by the manufacturer.

6.Attachments—Do not use attachments not recom- mended by the appliance manufacturer as they may cause hazards.

7.Water and Moisture—Do not use the appliance near water –for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8. Accessories—Do not place the appliance on an unstable cart, stand, tripod, bracket, or table. The appliance may fall, causing serious injury to a child or adult, and seri-

11.Power Sources—The appliance should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.

12.Grounding or Polarization—The appliance may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

13.Power Cord Protection—Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

14. Outdoor Antenna Grounding—If an outside antenna or cable system is connected to the appli- ance, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the

ous damage to the appli- ance. Use only with a cart,

S3125A

National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-

stand, tripod, bracket, or table recommended by the manufacturer, or sold with the appliance. Any mount- ing of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

9.An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combina- tion to overturn.

10.Ventilation—Slots and openings in the cabinet are provided for ventilation and to ensure reliable opera- tion of the appliance and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the appliance on a bed, sofa, rug, or other similar surface. The appliance should not be placed in a built-in instal- lation such as a bookcase or rack unless proper ventila- tion is provided. There should be free space of at least 8 in. (20 cm) and an opening behind the appliance.

in wire to an antenna-discharge unit, size of ground- ing conductors, location of antenna-discharge unit, connection to grounding electrodes, and require- ments for the grounding electrode. See Figure 1.

15.Lightning—For added protection for the appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to lightning and power-line surges.

16. Power Lines—An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

2

Page 2
Image 2
Onkyo TX-8011 instruction manual Important Safeguards

TX-8011 specifications

The Onkyo TX-8011 is a versatile and powerful stereo receiver that has earned a reputation for delivering high-quality audio performance at an attractive price point. Designed for those who appreciate both analog and digital audio sources, this receiver combined the best of both worlds, making it a popular choice among music enthusiasts.

One of the most notable features of the TX-8011 is its robust power output. With a maximum output of 100 watts per channel, this receiver is capable of driving a wide range of speakers, ensuring clear and dynamic sound reproduction across various listening environments. The low distortion and high-current capability further enhance the audio experience, making it suitable for both casual listening and more critical applications.

The TX-8011 incorporates advanced technologies to ensure high fidelity audio playback. The receiver is equipped with a well-designed AM/FM tuner that provides excellent reception of radio signals, along with the ability to store multiple preset stations for quick access. The inclusion of a built-in phono stage allows users to directly connect their turntables, catering to vinyl enthusiasts who wish to enjoy their analog collections.

For connectivity, the TX-8011 features a variety of inputs and outputs. These include multiple line-level inputs for various audio sources, as well as a set of speaker outputs that supports A/B speaker configurations, enabling users to connect different speaker setups. The receiver also includes a headphone output for private listening.

One of the TX-8011's strengths is its user-friendly interface, which includes intuitive controls for adjusting volume, input selection, and tone adjustments like bass and treble. The receiver is designed to integrate seamlessly with existing home audio systems, making it a flexible option for users looking to upgrade or build their systems.

In terms of build quality, the TX-8011 is housed in a solid and durable chassis that not only ensures longevity but also minimizes resonance and interference. The clean aesthetic design allows it to fit into a variety of home decor styles without drawing attention away from other components.

Overall, the Onkyo TX-8011 is an excellent choice for anyone seeking a reliable and high-performing stereo receiver. With its combination of power, connectivity options, and ease of use, it stands as a compelling option in the competitive landscape of audio equipment, ensuring that users can enjoy their favorite music and media with impressive sound quality.