Rear panel facilities

PRE OUT

These jacks are for connecting auxiliary power amplifier.

Using auxiliary power amplifiers allows you to listen at louder volumes than with the TX-DS797 alone. If power amplifiers are used, connect each speaker to the corresponding power amplifier.

L (white)

Front input

R (red)

DIGITAL

PRE OUT

OUTPUT

R

L

 

 

FRONT

 

 

OPT

 

 

Subwoofer

 

SUB

CENTER

DIGITAL

 

 

 

 

 

INPUT

 

 

 

COAX

SURR

 

L (white)

1

 

 

 

 

 

Surround

 

SURR

 

back

 

BACK/

 

2

 

 

 

 

 

R (red)

3

FRONT

MULTI

 

 

 

 

INPUT

 

 

L (white)

 

Surround input

 

 

 

 

R (red)

 

 

Center

 

Power amplifier

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

2

 

3

 

4

 

5

 

6

 

7

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.

 

Front left speaker

 

 

 

5.

Surround back right

2.

 

Front right speaker

 

 

 

 

 

 

speaker

3.

 

Subwoofer

 

 

 

 

 

 

6.

Surround left speaker

4.

 

Surround back left

 

 

 

7.

Surround right speaker

 

 

 

speaker

 

 

 

 

 

 

 

 

 

8.

Center speaker

ANTENNA

These jacks are for connecting the FM indoor antenna and AM loop antenna that are supplied with the TX-DS797.

AUDIO IN/OUT

These are the analog audio inputs and outputs. There are eight audio inputs and 3 audio outputs. The audio inputs and outputs require RCA-type connectors.

•When connecting a VCR or other video component, make sure you connect the audio and video leads together (i.e., both to VIDEO 3).

•The PHONO (PH) input jacks on the TX-DS797 is designed for use with turntables that use moving magnet cartridges.

RCA type

MONITOR OUT

The monitor output includes both composite video and S video configurations. This output is for connecting television monitors or projectors.

ZONE 2 AUDIO/VIDEO OUT

Connect the device that will be used in the remote zone (Zone 2). For more information regarding how to make the connections, refer to “Connecting the remote zone (Zone 2) speakers” on page 21.

COMPONENT VIDEO INPUT/OUTPUT

If your DVD player or other device has component video connectors, be sure to connect them to these component video connectors on the TX-DS797. The TX-DS797 has two component video input connectors to obtain the color information (Y, PB, PR) directly from the recorded DVD signal or other video component and one component video output connector to output it directly into the matrix decoder of the display device. By sending the pure DVD component video signal directly, the DVD signal forgoes the extra processing that normally would degrade the image. The result is vastly increased image quality, with incredibly lifelike colors and crisp detail.

Y PB PR

RCA type

SPEAKERS

Six terminals are provided for the front left, front right, front center, surround left, surround right, and surround back speakers. Speaker outputs are compatible with banana plug connectors (other than European models).

AC OUTLETS

The TX-DS797 is supplied with AC mains outlets for connecting the power cords from other devices so that their power is supplied through the TX-DS797. By doing this, you can use the STANDBY/ ON button on the TX-DS797 to turn on and off the connected devices as well.

The shape, number, and total capacity of the AC outlets may differ depending on the area of purchase.

Caution:

Make sure that the total capacity of the other components connected to this unit does not exceed the capacity that is printed on the rear panel (e.g., 120 watts).

 

AC OUTLETS

 

AC 120V 60 Hz

 

SWITCHED

 

TOTAL 120W 1A MAX.

AC OUTLETS

 

AC 230-240V 50 Hz

 

SWITCHED

 

TOTAL 100W MAX.

 

European and some

USA and Canadian

Asian models

models

12V TRIGGER ZONE 2 terminal

When the TX-DS797 is in the ZONE 2 mode, this terminal outputs at 12 V/100 mA.

13