Speaker Setup

1-4. Bass Peak Level(Bass Peak Level Manager*) sub-menu

Setting the bass peak level is important to keep your subwoofer from being damaged by preventing it from outputting over a set volume. If your subwoofer has a built-in limiter, set this setting to “Off.”

Note:

If your system does not include a subwoofer, this setting will set the bass peak level for your front speakers.

Advanced Menu

1.Speaker Setup

1-4.Bass Peak Level

a.Bass Peak Level Limiter :Off

Quit:SETUP

a. Bass Peak Level Limiter

On: Select to set the bass peak level. When “On” is selected, the Peak Level setting appears below.

Off: Select to turn off the bass peak level limiting function.

Advanced Menu

1.Speaker Setup

1-4.Bass Peak Level

a.Bass Peak Level Limiter :On

b.Peak Level :+18dB

Press to set

Peak Level.

Quit:SETUP

b. Peak Level

The current bass peak level is displayed. Press thecursor button to output a test sound. Then press the cursor button (or turn the Master Volume dial) to slowly raise the volume to the point where the sound becomes distorted and then back it off until it returns to normal. This is the proper setting for the bass peak level.

After setting the Peak Level at the Bass Peak Level sub-menu, press the RETURN button. The values are set and the previous screen appears.

Advanced Menu

1.Speaker Setup

1-4.Bass Peak Level

b.Peak Level :-27dB

1.Turn Volume up. 2.Press RETURN just

before sound is distorted.

db

Notes:

•The volume can be adjusted to either –∞or between –81 to +18 decibels in 1-decibel increments.

•Do not allow the distorted sound to be output from the subwoofer for a long time for it may damage the subwoofer.

* Bass Peak Level Manager is a registered trademark of Lucasfilm Ltd.

32