Onkyo TX-NR414 instruction manual En-37, Changing the Input Display, Using the Music Optimizer

Changing the Input Display

When you connect an u-capable Onkyo component, you must configure the input display so that ucan work properly.

This setting can be done only from the front panel.

1 Press TV/CD or GAME.

“TV/CD” or “GAME” appears on the AV receiver’s display.

2 Press and hold down the same button (about

3 seconds) to change the input display.

Repeat this step to select the desired input display.

■TV/CD: TV/CD → DOCK

→TAPE →

■GAME: GAME ↔ DOCK

“

Note

•“DOCK” can be selected for the “TV/CD” or “GAME” input selector, but not at the same time.

•Enter the appropriate remote control code before using the remote controller for the first time (➔ page 56).

Using the Music Optimizer

The Music Optimizer function enhances the sound quality of compressed music files.

1 (North American and Taiwanese models) Press MUSIC OPTIMIZER on the front panel.

The M.Opt indicator lights on the AV receiver’s display.

The MUSIC OPTIMIZER indicator lights on the front panel.

Tip

•Alternatively, you can use the remote controller’s

Q SETUP.

•See “Music Optimizer” for more details (➔ page 40).

Turning On & Basic Operations

Muting the AV Receiver

You can temporarily mute the output of the AV receiver.

1 Press RECEIVER followed by MUTING.

The output is muted and the MUTING indicator flashes on the AV receiver’s display.

Tip

•To unmute, press MUTING again or adjust the volume.

•Muting is automatically cancelled when the AV receiver is set to standby.

En-37