Onkyo TX-NR808 instruction manual IntelliVolume, Sync, Name Edit

IntelliVolume

■IntelliVolume

`–12dBto 0dB to +12dB in 1 dB steps.

With IntelliVolume, you can set the input level for each input selector individually. This is useful if one of your source components is louder or quieter than the others. Use e/rto set the level.

If a component is noticeably louder than the others, use e to reduce its input level. If it’s noticeably quieter, use rto increase its input level.

A/V Sync

■A/V Sync

`0ms to 250ms in 5 ms steps.

When using your DVD player’s progressive scanning function, you may find that the picture and sound are out of sync. With the A/V Sync setting, you can correct this by applying a delay to the audio signal.

To view the TV picture while setting the delay, press

ENTER.

To return to the previous screen, press RETURN.

If HDMI Lip Sync is enabled (➔ 56) and your TV or dis- play supports HDMI Lip Sync, the displayed delay time will be the summation of the A/V Sync delay time and the HDMI Lip Sync delay time. The HDMI Lip Sync delay time is displayed underneath in parentheses.

Note

•A/V Sync is disabled when the Pure Audio listening mode is selected, or when the Direct listening mode is used with an ana- log input source.

•“A/V Sync” is not operable when the input selector is set to “NET/USB”.

Name Edit

You can enter a custom name for each individual input selector (excluding TUNER) and radio preset for easy identification. When entered, the custom name will appear on the display.

The custom name is edited using the character input screen.

■Name

1Use q/w/e/rto select a character, and then press ENTER.

Repeat this step to enter up to 10 characters.

2When you’ve finished, to store a name, be sure to use q/w/e/rto select “OK”, and then press

ENTER. Otherwise it will not be saved.

En

Name input area

4-4. Name Edit

BD/DVD

Name

a

b

c

d

e

f

g

h

i

j

k

l

m

n

o

p

q

r

s

t

u

v

w

x

y

z

1

2

3

4

5

6

7

8

9

0

–

`

{

}

:

<

>

?

Shift

Space

Back Space

OK

+10

Shift

CLR

All Erase

A B C D E F G H

I

J K L M

N O P Q R S T U V W X Y Z

!

@

#

$

%

^

&

(

)

_

~

[

]

;

’

,

.

/

Shift

Space

Back Space

OK

+10

Shift

CLR

All Erase

Shift*1:

Switches the displayed character.

(Left)/ (Right):

Selected when the cursor is moved within the Name input area.

Space:

Enters a space character.

Back Space*2:

“Back Space” moves the cursor backward one char- acter space. In addition, “Back Space” deletes the character to the left of the cursor.

OK:

Selects when the entry is complete.

Tip

*1 You can also be performed on the remote controller by using +10.

*2 Press CLR on the remote controller, you can delete all characters in the input.

To correct a character:

1 Use q/w/e/rto select “ ”(Left) or “ ”(Right), and then press ENTER.

2	Press ENTER several times to select the incor-
	rect character (The cursor moves one letter
	each time ENTER is pressed).
3	Use q/w/e/rto select the correct character,
	and then press ENTER.

Note

•To name a radio preset, use TUNER to select AM or FM, and then select the preset (➔ 32).

•(North American models) You cannot enter a custom name for SIRIUS radio presets.

•“Name Edit” is not operable when the input selector is set to “NET/USB”.

To restore a custom name to the default, erase the custom name by entering an empty white space for each letter.

52