Onkyo TX-NR808 instruction manual Connecting a Power Amplifier, a b c d e f g

Connecting a Power Amplifier

If you want to use a more powerful power amplifier and use the AV receiver as a preamp, connect it to the PRE OUT jacks, and connect all speakers and the subwoofer to the power amplifier. If you have a powered subwoofer, connect it to this AV receiver’s SUBWOOFER PRE OUT jack. You can connect the powered subwoofer with two SUBWOOFER PRE OUT jacks respectively. The same signal is output from each jack.

Power amplifier

a b c d e f g

aFront left speaker bCenter speaker cFront right speaker dSurround left speaker eSurround right speaker

fSurround back/Front wide/Front high left speaker*1 gSurround back/Front wide/Front high right speaker*1

Note

*1 Specify “None” for the channel that you don’t want to output (➔ 46).

SB···Surround Back, FH···Front High, FW···Front Wide

*1

Powered subwoofer

See “Connecting a Powered Subwoofer” for more information (➔ 15).

En

16