Onkyo TX-SR501E Precautions-Continued, Supplied Accessories, Features, For North American model

Precautions—Continued

1.Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder.

2.AC Fuse—The AC fuse inside the TX-SR501/TX-SR501E is not user-serviceable. If you cannot turn on the TX-SR501/ TX-SR501E, contact your Onkyo dealer.

3.Care—Occasionally you should dust the TX-SR501/ TX-SR501E all over with a soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water. Dry the TX-SR501/TX-SR501E immediately after- wards with a clean cloth. Don’t use abrasive cloths, thinners, alcohol, or other chemical solvents, because they may damage the finish or remove the panel lettering.

4.Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.

AC outlet voltages vary from country to country. Make sure that the voltage in your area meets the voltage requirements printed on the TX-SR501/TX-SR501E’s rear panel (e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz).

The Worldwide model has a voltage selector for compatibility with power systems around the world. Before you plug in this model, make sure that the voltage selector is set to the correct voltage for your area.

For North American model

Setting the [STANDBY/ON] switch to STANDBY does not fully shutdown the TX-SR501/TX-SR501E. If you do not intend to use the TX-SR501/TX-SR501E for an extended period, remove the power cord from the AC outlet.

Memory backup

The TX-SR501/TX-SR501E uses a battery-less memory backup system in order to retain radio presets and other settings when it’s unplugged or in the case of a power failure. Although no batteries are required, the TX-SR501/TX-SR501E must be plugged into an AC outlet in order to charge the backup system.

(On non-North American models, the TX-SR501/ TX-SR501E’s POWER switch must be set to ON in order to charge the backup system.) Once it has been charged, the TX-SR501/TX-SR501E will retain the settings for several weeks, although this depends on the environment and will be shorter in humid climates.

Supplied Accessories

Make sure you have the following accessories:

Only supplied in certain countries. Use

this adapter if your AC outlet does not

Indoor FM antenna

match with the plug on the TX-SR501/

TX-SR501E’s power cord. (Adapter var-

(connector type varies from

ies from country to country.)

AM loop antenna

country to country)

Power-plug adapter

Front Left Front Left

SP-B / Zone 2

Left

SP-B / Zone 2

Left Front Right Front Right

SP-B / Zone 2

Right

SP-B / Zone 2

Right Surround Left Surround Left Surround Right Surround Right Center Center

Surround Back Left

Surround Back Left Zone 2

Left Zone 2

Left

Surround Back Right

Surround Back Right Zone 2

Right Zone 2

Right

Front Left Front Left

SP-B / Zone 2

Left

SP-B / Zone 2

Left Front Right Front Right

SP-B / Zone 2

Right

SP-B / Zone 2

Right Surround Left Surround Left Surround Right Surround Right Center Center

Surround Back Left

Surround Back Left Zone 2

Left Zone 2

Left

Surround Back Right

Surround Back Right Zone 2

Right Zone 2

Right

1

2

Not supplied with North American and

3

Speaker Cable

European models.

Remote controller &

Speaker cable labels

75/300-ohm antenna

adapter

two batteries (AA/R6)

*In catalogs and on packaging, the letter added to the end of the product name indicates the color of the TX-SR501/TX-SR501E. Specifications and operation are the same regardless of color.

Features

Amp

•6-channel amplifier

•65 watts per channel min. RMS at 8 Ω, 2 channels driven from 20 Hz to 20 kHz with no more than 0.08% total har- monic distortion

•WRAT (Wide Range Amplifier Technology)

•Optimum gain volume circuitry

Audio/Video

•Dolby*1 Digital EX and Dolby Pro Logic II

•DTS, DTS-ES Matrix/Discrete 6.1, and DTS Neo:6 pro- cessing*2

•Cinema Filter function

•Advanced 24-bit DSP chip (5 DSP soundfields)

•Linear PCM 96 kHz/24-bit D/A converters on all channels

•Adjustable crossover (60, 80, 100, 120, 150 Hz)

•2 component video inputs, 1 output

•4 S-Video inputs, 2 outputs

•3 assignable digital inputs (2 optical, 1 coaxial)

•Subwoofer pre out

•Color-coded multi-channel inputs

•Color-coded speaker terminal posts (SPEAKERS B use push-type terminals)

FM/AM Tuner

•30 FM/AM presets

•FM auto tuning

•RDS (Radio Data System) (Europe only)

*1. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

*2. “DTS,” “DTS-ES Extended Surround,” and “Neo:6” are trademarks of Digital Theater Systems, Inc.

4