Digital Input Signal Formats

Advanced Setup—Continued

4	Use the Left and Right [	]/[ ]
	buttons to adjust the speaker
	level, and use the Down [	] but-
	ton to select the next speaker.

The levels can be adjusted from –12 to +12 dB in 1 dB steps (–15 to +12 dB for the subwoofer).

5	Repeat step 4 so that the level of
	Repeat step 4 so that the level of
	the test tone coming from each
	speaker is the same.
	Speakers that you set to No or None in
	the Speaker Conﬁguration (page 34) do
	not output the test tone.

6	Press the [SETUP] button.
	Press the [SETUP] button.
	Setup closes.
	Don’t forget to turn down the volume if
SETUP	you turned it up while setting the levels.

Note:

•A quick way to adjust the speaker levels is to press the remote controller’s [TEST TONE] button to turn on the test tone, use the [LEVEL–] and [LEVEL+] but- tons to adjust the levels, and use the [CH SEL] button to select the speakers.

The following table shows the display indicator for each digital signal format.

Format	Display

Dolby Digital
Dolby Digital


DTS
DTS


PCM		PCM

Normally, the AV receiver detects the signal format auto- matically. However, if you experience either of the fol- lowing issues when playing PCM or DTS material, you can specify the signal format as either PCM or DTS:

•If the beginnings of tracks from a PCM source are cut off, try the PCM setting.

•If noise is produced when fast forwarding or reversing a DTS CD, try the DTS setting.

MASTER VOLUME

TUNING

PRESET

STANDBY/ON

STANDBY

ENTER

MULTI CH

DVD

VIDEO 1

VIDEO 2

VIDEO 3

TAPE

TUNER

C D

RETURN

SETUP

VCR

VIDEO 3 INPUT

PHONES

VIDEO

L AUDIO

SPEAKERS

TONE

STEREO

LISTENING MODE

DISPLAY

DIGITAL

DIMMER MEMORY

TUNING

INPUT

MODE

DIGITAL INPUT

1	Press and hold the AV receiver’s [DIGITAL
	INPUT] button for about 3 seconds.

2	While “Auto” is displayed (about 3 sec-
	onds), press the [DIGITAL INPUT] button

repeatedly to select: PCM, DTS, or Auto.

PCM: Only PCM format input signals will be heard. If the input signal is not PCM, the PCM indicator will ﬂash and there will be no sound.

DTS: Only DTS format input signals will be heard. If the input signal is not DTS, the DTS indicator will ﬂash and there will be no sound.

Auto (default): The format is detected automati- cally. If no digital input signal is present, the corresponding analog input is used instead.

TX-SR504/B, TX-SR8450, TX-SR504E specifications

The Onkyo TX-SR504E, TX-SR8450, and TX-SR504/B are part of Onkyo's celebrated lineup of audio/video receivers, known for their superior sound quality, advanced features, and user-friendly interface, making them perfect for home theater enthusiasts.

The Onkyo TX-SR504E is a 7.1-channel receiver that supports multiple audio formats, including Dolby Digital and DTS for an immersive sound experience. It features 75 watts per channel, providing ample power to drive a variety of speakers, enhancing both dialogue clarity and dynamic range. The TX-SR504E includes built-in decoding for Dolby TrueHD and DTS-HD Master Audio, allowing users to enjoy high-definition audio from Blu-ray discs. Its advanced Audyssey 2EQ technology optimizes speaker placement and acoustics, ensuring that sound is balanced throughout the room.

Moving up the line, the Onkyo TX-SR8450 offers even more features and robust performance. With a power output of 100 watts per channel, it caters to those who desire a more powerful audio experience. The TX-SR8450 includes advanced video processing technologies, such as Faroudja DCDi Cinema, ensuring that standard-definition content is upscaled to near-HD quality. It offers multiple HDMI inputs and outputs, making it easy to connect all your devices. The receiver also supports 3D pass-through capabilities and features zone 2/zone 3 audio outputs for multi-room setups.

For those seeking a cost-effective option, the TX-SR504/B serves as a great entry point into high-quality audio. This 7.1-channel receiver features a solid build and straightforward design that makes it accessible to beginners while still packing a punch for seasoned users. It delivers clean audio and offers enough connectivity options to support various home theater components, including multiple digital and analog inputs. The receiver comes equipped with Dolby Pro Logic II and THX Select certification, ensuring a cinema-like experience.

All three models emphasize user-friendly setups, with graphical user interfaces simplifying the installation process, and remote control options enhancing convenience. The Onkyo receivers are built with high-quality components, including custom-designed capacitors and high-current amplifiers, ensuring durability and reliability.

In conclusion, whether you opt for the TX-SR504E, TX-SR8450, or TX-SR504/B, Onkyo delivers a rich audio experience backed by innovative technologies, making these receivers excellent choices for any home theater system. These models stand out for their quality, performance, and versatility, catering to a range of audio preferences and budgets.

Onkyo TX-SR504E, TX-SR8450, TX-SR504/B instruction manual Digital Input Signal Formats

Models: TX-SR504/B TX-SR8450 TX-SR504E

Advanced Setup—Continued

speaker is the same.

Press the [SETUP] button.