Listening to the Radio
AM/FM Frequency Step Setup (not European models)
RECEIVER
4 Use the Up and Down [q]/[w] buttons to select “FM/AM” (North American /Taiwan models) or “AM Freq” (Asian models). (North American /Taiwan models)
(Asian models)
ENTER
SETUP
qwer
5 | Use the Left and Right [e]/[r] |
| buttons to select: |
(North American /Taiwan models) 200k/10k:
For AM/FM tuning to work properly, you must specify the AM/FM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted.
1 | Press the [RECEIVER] button, |
| |
| followed by the [SETUP] button. |
2 | Use the Up and Down [q]/[w] |
| buttons to select |
“7.HardwareSetup”, and then press [ENTER].
3 | Use the Up and Down [q]/[w] |
| buttons to select “2. Tuner”, and |
then press [ENTER].
Select if 200k/10k steps are
used in your area.
50k/9k: Select if 50k/9k steps are used in your area.
(Asian models)
10kHz: Select if 10kHz steps are used in your area.
9kHz: Select if 9kHz steps are used
| in your area. | |
|
| |
6 | Press the [SETUP] button. | |
Setup closes. | ||
|
Note:
This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
49