Onkyo UP-HT1, I0905-1 Erasing Presets, Naming Presets, En-21, Select the preset you want to erase

Erasing Presets

1.Select the preset you want to erase.

2.Press the [SETUP] button, and then use Up/Down Arrow []/[ ] buttons to select “Preset Erase”.

3.Press [ENTER].

A message requesting confirmation appears. To cancel the Preset Erase function at this point, press the [RETURN] button.

4.To erase the preset, press [ENTER].

The preset is erased and “Erase OK?” appears on the display.

5.Press [ENTER].

The preset is erased and “Complete” appears on the display.

Naming Presets

You can name presets for easy identification. The pre- set name may contain of up to ten characters.

1.Select the preset you want to name.

2.Press the [SETUP] button, and then use the Up/Down Arrow []/[ ] buttons to select “Name Edit”

3.Press [ENTER].

4.Use the Up/Down []/[ ] buttons to select the available characters (see next

page), and use the Left/Right []/[ ] but- tons to move the cursor.

5.When you’ve finished entering the name,

press [ENTER].

“Name Edit” appears on the display.

6.Press the [RETURN] button to return to the normal display.

En-21