INSTALLATION
12
Connecting to a TV and A/V Receiver via Dual HDMIHDMI IN
HDMI Cable 1
HDMI Cable 2
Rear Panel
AUDIO/VIDEO MULTI-CHANNEL
RECEIVER
HDMI IN
xThe BDP-103 provides a “Dual HDMI” connection to make sure you can enjoy the highest possible
video quality and resolution, in addition to high bit rate audio content. You can use the included
HDMI cable to connect the HDMI 1 output to your HDTV and use another HDMI cable (not included)
to connect the HDMI 2 output to your receiver by setting the Dual HDMI Output option in the
Setup Menu to Split A/V (see page 53 for details). In this way you can utilize the dedicated video
processor available for the HDMI 1 output, and allow your receiver which has no HDMI 1.4 inputs
to work without any loss to the digital audio signals.
xThis configuration is recommended when you have a 3D-compatible display, but your receiver is
not 3D-compatible. This allows you to send the video signal (3D, in this case) directly to the TV and
the audio signal to the receiver to be distributed to your speakers as it normally would.
NOTE
xPlease refer to the notes on HDMI connections available on page 11.
xIf your receiver does not have HDMI audio input capability, please try the alternate
connection methods discussed on pages 16 and 17.