INSTALLATION
21
Custom Installation

External IR (Infrared Remote) Installation

The BDP-103 features an IR IN port on its back panel. If the player is to be installed in an equipment cabinet
where direct line-of-sight is not available for the remote control, you can purchase an external IR Remote
Sensor and plug it into the IR IN port. Place the sensor head at a location where there is direct line-of-sight to
ensure reliable operation.
3.5mm Stereo Cable
Rear Panel
External IR Remote Signal
IR IN Signal Identifications
Tip: IR carrier signal
Sleeve: Ground
3.5mm Mono Plug
NOTE
xWhen an external IR sensor is plugged in, the original IR sensor window on the front panel
will be disabled.
xThe IR port on the BDP-103 is NOT compatible with the prior generation of external IR
Remote Sensor (IR-ES1) which is used on BDP-83.
xOPPO cannot guarantee that the IR IN port will be compatible with devices that are not
manufactured by OPPO. Connecting the IR IN port to an incompatible device may result in
damage to the connected device or the player.
xPlease contact OPPO customer support if you plan to integrate the player into an IR
distribution system. Customer support can provide recommendations on how to properly
connect the control signals.

RS232 Control

The BDP-103 has an RS232 control port and can be integrated into most custom home theater control systems.
Please ask your custom installer to contact OPPO for the RS232 control protocol, or check the OPPO Digital
website (www.oppodigital.com) for the latest version of RS-232 protocol document.