OPPO Digital BDP-80 Setting Up the Player - Easy Setup Wizard, Access the Easy Setup Wizard, ENTER, ENTER, ENTER, Cancel, UP/DOWN ARROW, LEFT/RIGHT ARROW, Reset Factory Defaults

To make your selection, use the UP/DOWN ARROW buttons to highlight the choice, and then press the ENTER button to go to the next step.

Component

Step: 2/6

Choose the primary video output that you use.

Better performance will be provided over an HDMI connection.

HDMI

Easy Setup

The player can output video through its HDMI and component output terminals. (Composite video and S-Video outputs are also available but not recommended.) By setting the “Primary Video Output” option, the player can optimize video output of the selected terminal. The choices are “HDMI” and “Component”. If you connect the player to the TV using an HDMI cable (Method 1 on page 10, Method 2 on page 11, or Method 4 on page 13), please select “HDMI”. If you connect the player to the TV using component video cables (Method 3 on page 12), please select “Component”. Please note: the best performance will be provided over the HDMI connection.

The Easy Setup Wizard will help you configure the basic settings for this player. More detailed settings can be accessed at the Setup Menu at any time after finishing or exiting the wizard.

Press OK to initiate the Easy Setup Wizard, press Cancel to exit this Wizard immediately.

Choose the Primary Video Output

The first step of the Easy Setup Wizard gives you the opportunity to skip the entire wizard. If you are familiar with setting up audio/video equipment and would like to customize the player settings using its Setup Menu, you may use the LEFT/RIGHT ARROW buttons to select the “Cancel” option, then press the ENTER key to exit the Easy Setup Wizard. Otherwise, to continue with the Easy Setup Wizard, select the “OK” option and press the ENTER key.

If the Easy Setup Wizard has previously been completed or cancelled, it will no longer initiate when you turn on the player. Instead, you will see the background screen with the OPPO and Blu-Ray Disc logos. To access Easy Setup Wizard, please press the SETUP button on the remote control, select Device Setup, then

Reset Factory Defaults. Select “OK” to confirm

Easy Setuploading the factory default settings. Once the factory default settings are loaded the Easy Setup

Wizard will appear.

Step: 1/6

You

To start the Easy Setup Wizard, please follow these steps:

1) Turn on the TV.

2) Turn on the player.

3) Switch the input selection on your TV so that the TV displays the signal from the player. should see the first step of the Easy Setup Wizard.

I N S T A L L A T I O N

Setting Up the Player - Easy Setup Wizard Access the Easy Setup Wizard

When the player is turned on for the first time, an Easy Setup Wizard screen will appear. It is a series of guided instructions designed to configure the basic settings for the player.