BASIC OPERATIONS

Disc Playback

DVD-A SACD

 

 

1． Press the POWER button to turn on the player.

POWER

OPEN

2． Press the OPEN/CLOSE (OPEN) button to eject the disc tray.

 

 

3． Place the disc with the label side facing up and the recorded

 

 

side facing down.

4． Press the OPEN/CLOSE (OPEN) button again to retract the tray.

5． The player will read the disc information and starts playback.

6． Depending on the content of the disc, a menu or navigation screen may appear. Please use the navigation ARROW and SELECT buttons to select the content to play.

STOP

PLAY

7． To stop playback, press the STOP button.

 

 

8． To turn off the player, press the POWER button.

NOTE

•During DVD and some Blu-ray Disc playback, pressing the STOP button for the first time brings the player to a pre-stop mode. You can resume playback from the stopped point by pressing the PLAY button. This pre-stop mode allows you to change the player settings and then resume playback. To completely stop playback, press the STOP button twice.

•Certain Blu-ray Discs with BD-Java technology do not support the pre-stop mode. Pressing the STOP button during playback of such discs will completely stop the disc. Pressing the PLAY button once the disc is stopped will restart it from the very beginning.

•This unit consumes a tiny amount of power even when it is turned off to STANDBY mode. If it is not to be used for a long time, unplug it from the household AC outlet.

Fast Playback

DVD-A SACD

You may fast forward or reverse during playback.

REV

FWD

1. Press the FWD button on the remote control and the player starts fast forward playback. Each press of the FWD button switches the playback speed in the following sequence:

1 2

5 4 3

23