OPPO Digital BDP-80 manual 72

R E F E R E N C E S

Incorrect color	Incorrect color space setting	If using HDMI for video output, check the color space	46
		setting on the TV and player.
	Incorrect component video	If using component video output, check the three	12
	cable connection	component video cables to make sure the signals
		match on both ends
Picture rolling or	Video output resolution is not	Select a proper output resolution that is supported by	29
split picture	support by the TV	your TV.
	Video system is not supported	When playback is completely stopped, press and hold	29, 47
	by the TV	the P/N button or set the correct TV System in the
		Setup Menu.
“No Disc” or	No disc or incompatible disc	Eject disc and check.	23
“Unknown Disc”	loaded in player
error	Dirty disc recording surface	Eject the disc and clean any dirt or fingerprints.	3
	Disc not properly loaded	Eject disc and make sure the label side is facing up	23
		and the record side is facing down.
	Condensation on the Laser	Turn on the player, eject the disc and leave the player	2
	pick-up head	on for about an hour.
Remote control	Remote control is out of range	Use the remote control within the effective range.	8
failure	Low battery	Replace the batteries.	8
	Incorrect remote control code	Open the disc tray. Aim the remote at the player. Press	9
		and hold the ENTER button on the remote for 5
		seconds to set the remote code.
Temporary	Scratched or damaged disc is	Replace the disc.	23
function failure	used
	Some functions are not	Stop playback completely, then try again.	23
	available during playback
	Interference from other devices	Identify interference by turning off other devices, and	2
		then relocate or replace the offending device
Some Setup	Some setup options cannot be	Fully stop playback, eject the disc and try the Setup	18
Menu items are	changed while a disc is playing.	Menu again.
grayed out	Some setup options may be
	mutually exclusive with other
	setup options.

66