Manual No. 25-ULPNMU01-01

LPN1736 Omni-Directional Laser Scanner

Chapter 3

USB Interface

This chapter contains information on setting up your scanner with an USB interface.

The RS232 scanner cable is terminated in a Type A USB connector. The external power supply (+5VDC) is necessary. There is a pig tail adapter with the power supply jack leading to the USB connector

Plug the scanner into a USB port on your host computer. The PC must be running Windows 98 (or iMac Rev A) or higher. The computer will sense the presence of the scanner and load any required software driver.

Reset All Defaults - USB

 

TV

Reset all defaults - USB (SU)

Reset All Defaults USB (SU)

 

Page 25