Manual No. | LPN5627 / LPR5627 Laser Fixed Mount |
Scanner |
|
X7 | Xmit data from Low and High gain |
|
|
| Good Read LED Operation |
T4 | Disable good read LED (GRL) |
T8 | GRL ON for 0.10 seconds after decode |
T5 | GRL ON for 0.20 seconds after decode |
T6 | GRL ON for 0.40 seconds after decode |
T7 | GRL ON for 0.80 seconds after decode |
V0 | LED ON Red for 0.40 seconds |
V1 | LED ON Red for 0.80 seconds |
V8 | LED ON Green for .40 seconds |
V9 | LED ON Green for .80 seconds |
| Trigger Input, OK & NG Output Controls |
8A | Trigger Input (positive logic) High active |
8B | Trigger Input (negative logic) Low active |
8C | Output synchronous transmission (negative – |
| true logic) |
8D | Output synchronous transmission (positive – |
| true logic) |
8E | Output |
| true logic) |
8F | Output |
8G | Output |
8H | Output |
8I | Output |
8J | Output |
8K | Output |
8L | Output |
8M | Output |
8N | Output |
8O | Output |
8P | Output |
8Q | Enable outputs |
8R | Disable outputs |
|
|
| Motor Control |
S6 | Motor always ON |
S5 | Motor OFF until trigger |
Page 23