Manual No. | LPN5627 / LPR5627 Laser Fixed Mount |
Scanner |
|
10. Fixing the Number of Digits
Computer | Function | Bar Code |
|
Command | /Description | Command |
|
(Z7) | START/END |
| |
Programming Menu |
| ||
|
|
|
|
7V | Enable fixation |
|
|
(1 Length) |
|
| |
|
|
| |
|
|
|
|
7W | Enable fixation |
|
|
(2 Lengths) |
|
| |
|
|
| |
|
|
| % |
(H0) | Disable fixation | ||
|
|
| |
|
|
|
|
(H1) | Enable fixation |
| |
(1 length) |
| ||
|
|
|
|
(H4) | Enable fixation |
| |
(t lengths) |
| ||
|
|
|
|
H2 | Disable 1 character | % | |
Code 39 and Codabar | |||
| Disable 2 characters 2 of 5 | ||
|
|
|
|
H3 | Enable 1 character |
| |
Code 39 and Codabar |
| ||
| Enable 2 characters 2 of 5 |
| |
|
|
|
|
To avoid truncation errors, the scanner can be programmed to only decode bar codes of one specific length, i.e., containing a specific number of digits. It is also possible to program the scanner to only decode bar codes of either of two specific lengths.
To fix one (1) length (or number of digits) of bar code:
1.Scan “START” to enter the programming mode
2.Scan “Enable fixation(H1)” bar code
3.Scan a sample bar code of the desired length
4.Repeat Step #3,
5.Scan “STOP” to exit the programming mode
To fix two (2) different lengths of bar codes:
1.Scan “START” to enter the programming mode
2.Scan “Enable fixation(H4)” bar code
3.Scan a sample bar code of the desired length #1
4.Scan a sample bar code of the desired length #2
5.Scan “STOP” to exit the programming mode
NOTE: Fixation can also be programmed using computer commands through your RS232 by typing <ESC>7V<CR> followed by <+>2 digit length 1<CR>. 7W would be appropriate for length 2. Type<+>00<CR> to define either length as no fixed number.
“Fixing the Number of Digits” can only be applied to Code 39, Codabar
Page 37