Opticon LPN5627, LPR5627 - page 58

Manual No. 25-ULPNR101-03; Feb, 2003 LPN5627 / LPR5627 Laser Fixed Mount
Scanner
Page 54
24. Selecting the Read Mode (continued)
The operation of the scanner in the various read modes is described in the table below. The “Continuous
Read” mode is helpful in positioning the scanner for optimum reading. In “Continuous Read,” the
scanner’s buzzer functions like a Geiger counter, sounding the most active at the position achieving the
greatest number of good reads.
Mode Trigger Function Enabled Trigger Function Disabled
After receiving a trigger pulse,
scanner will read multiple,
different bar codes in succession
until it times out.
Scanner will read different bar codes
in succession if they are presented to
the read window.
Multiple
Read Scanner will not read the same
bar code twice if they are
consecutive.
Scanner will not read the same bar
code twice if they are consecutive.
Continuous
Read
Scanner will read the same bar
code continuously after receiving
a trigger pulse until scanner
times out.
Scanner will read the same bar code
continuously.
Single
Read
Scanner will read only one bar
code after receiving a trigger
pulse.
Same as Multiple Read mode, above.