INSTALLATION
BEFORE YOU BEGIN THE INSTALLATION
Before you install your stereo, read all the instructions in this owner’s manu- al. You should be able to answer all of these questions about your vehicle’s electrical and sound systems.
•Which terminal in my vehicle’s fuse box supplies power even when the ignition is turned off?
•Which terminal in my vehicle’s fuse box is for accessories?
•How do I connect a wire to the fuse box?
Also, be aware that installation in your vehicle might require cutting or modi- fying your vehicle.
Place the stereo as close as possible to the selected mounting location. We recommend that you install the stereo by temporarily connecting it to ground and power, optional components, and your speakers. Then test the connec- tions, disconnect the stereo, mount it in your vehicle, and reconnect it. The in- structions in this manual are arranged in this order.
Preparing the Mounting Area
Before you mount the stereo, make sure you have all the necessary mate- rials. Then confirm that the stereo fits your vehicle’s mounting area. This au- tosound stereo system is a
Note: If the mounting area is too large, you might be able to mount the stereo with an
Cautions:
•Make sure the stereo will not tilt up more than 30 degrees when it is mounted.
•Be sure to avoid obstructions be- hind the mounting surface.
Routing Speaker Wires
If you install speakers, avoid routing the speaker wires near moving parts or sharp edges. You can usually route them along the wiring channel be- neath the vehicle’s door facings by carefully removing the molding that holds the carpet in place. After you route the speaker wires, replace the molding.
Removing the Shipping Screw
The shipping screw helps protect the stereo’s CD player from being dam- aged during shipment.
Before you mount the stereo, use a Phillips screwdriver to remove the shipping screw from the top of the ste- reo.
6
