ADJUSTING THE SOUND
When you listen to your stereo, adjust these controls to suit your listening preferences.
(illus)
AUDIO CONTROL SEL +/– — Repeat- edly press or hold down to increase or decrease the volume. VOL and a vol- ume level number appear.
Warning: To protect your hearing, do not listen at high volume levels. Slowly increase the volume to a comfortable listening level.
AUDIO CONTROL SEL — Repeatedly press until bAS, TRE, bAL, or FAd and a number appear on the display, then repeatedly press or hold down + or – within 5 seconds to change the stereo’s bass, treble, balance, or fader settings.
Notes:
•When you adjust the balance toward the left speakers, L and a number appear on the display. When you adjust the balance toward the right speakers, R and a number appear.
•When you adjust the fader toward the front speakers, F and a num- ber appear on the display. When
you adjust the fader toward the rear speakers, R and a number appear.
•If bAS, TRE, bAL, or FAd and the number disappear before you press + or
AUDIO CONTROL SEL until the setting you want reappears, then repeatedly press or hold down + or – to set it.
•To set bass, treble, balance, and fader to their center (middle) set- tings, hold down AUDIO CONTROL SEL for about 3 seconds until the stereo beeps twice.
LOUD
(illus)
FAVORITE SOUND
MEMORY
ONLY)
You can store your stereo’s current volume, bass, treble, balance, and fader settings into memory. This lets you select the best sound for the mu- sic you listen to and save that sound,
17
