Optimus 12-2155, 12-2154 owner manual Connecting One Pair of Speakers

12-2154.fm Page 10 Wednesday, July 14, 1999 3:34 PM

(illus)

1.Connect the gray wire to the right front speaker’s positive terminal. This terminal is usually marked with a plus (+) sign or red mark.

2.Connect the gray/black wire to the right front speaker’s negative ter- minal. This terminal might be marked with a minus (– ) sign or it might not be marked at all.

3.Connect the white wire to the left front speaker’s positive terminal.

4.Connect the white/black wire to the left front speaker’s negative terminal.

5.Connect the violet wire to the right rear speaker’s positive terminal.

6.Connect the violet/black wire to the right rear speaker’s negative terminal.

7.Connect the green wire to the left rear speaker’s positive terminal.

8.Connect the green/black wire to the left rear speaker’s negative terminal.

10

Connecting One Pair of Speakers

For 12-2155:If you are using only one pair of speakers, follow Steps 1– 4 in “Connecting Two Pairs of Speakers” on Page 9 to connect the harness with the 14-pin connector to the speakers.

(illus)

For 12-2154:If you are using only one pair of speakers, remove the tape that holds the mounting sleeve in place and slide the sleeve off of the stereo. Then set 2CH/4CH on the bottom of the stereo to 2CH. Then follow these steps to connect the harness with the 14-pin connector to the speakers.

(illus)