Connecting Other Equipment
You can connect conventional audio equipment and TV.
• DO NOT connect any equipment while the power 
is on.
•DO NOT plug in any equipment until all connections are complete.
To connect analog audio component
Be sure that the plugs of the audio cords are color coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.
AUX IN
Audio equipment
To audio output
Connect the audio output jacks on the other equipment and AUX IN jacks using an audio cords (not supplied.)
To connect audio equipment with an optical digital input terminal
You can record CD sound onto the connected digital equipment.
DIGITAL OUT | Protective |
[ OPTICAL ] | plug |
Before connecting the other equipment, remove the protective plug from the terminal.
To optical
digital input Audio equipment 
with an optical digital input
Connect an optical digital cord (not supplied) between the optical digital input terminal on the other equipment and the DIGITAL OUT [OPTICAL] terminal.
English
To connect the TV
VIDEO
OUT
To video input
TV
Connect the video input jacks and the VIDEO OUT jack on the rear using a video cord (supplied.)
Adjusting the Voltage Selector
Before plugging in the unit, set the correct voltage for your area with the voltage selector on the rear of the unit.
• DO NOT plug in before setting the voltage selector on the rear of the unit and all connection procedures are complete.
| R | R |
|
110 | 240 |
|
|
|
|
| |
127 | - |
|
|
| 220 |
|
|
VOLTAGE |
|
| |
SETTING |
|
| |
| 110 |
|
|
| 127 | 230 | - |
|
|
| |
|
| 220 |
|
| VOLTAGE |
| |
| SETTING |
| |
Using a screw driver, set the voltage selector so that the arrow on printed on the rear points the correct voltage where you use this unit. (See the back cover page.)
NOW, you can plug in the unit and other connected equipment FINALLY!
Cancelling the Display Demonstration
When connecting the AC power cord into a wall outlet, the unit automatically starts display demonstration.
On the unit ONLY:
CANCEL
To cancel the display demonstration, press DEMO. /DEMO
When you press other buttons
The display demonstration stops temporarily. It will start automatically again (if no operation is done for 2 minutes) until you cancel it by pressing DEMO.
To start the display demonstration manually
Press and hold DEMO again for more than 2 seconds.
