Continued
Selecting the Sources | Adjusting the Volume | |
|
|
|
English
To listen to the FM/AM broadcasts, press FM/AM. (See
page 12.)
To play back discs, press CD 6. (See pages 13 – 19.) To play back tapes, press TAPE 3. (See page 20.)
To select the external equipment as the source, press AUX.
When you press the play button for a particular source (AUX, FM/AM, CD 6, and TAPE 3), the unit turns on (and the unit starts playing the source if it is ready — COMPU PLAY CONTROL).
You can adjust the volume level only while the unit is turned on.
Turn the VOLUME control clockwise to increase the volume or counterclockwise to decrease it.
•The volume level can be adjusted in 32 steps (VOL MIN, VOL 1 — VOL 30, and VOL MAX).
When using the remote control, press VOLUME + to increase the volume or press VOLUME – to decrease it.
Setting the AM Tuner Interval Spacing | For private listening |
Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing.
On the unit ONLY:
When shipped, the unit is set to 9 kHz spacing.
To select 10 kHz, press 
STANDBY/ON while holding down Á when the unit is in standby mode.
“AM
TUNING | + | STANDBY |
| ||
| STANDBY/ON | |
|
|
To change back to 9 kHz interval, press 
STANDBY/ON while holding down 1 when the unit is in standby mode. “AM
| + | STANDBY |
TUNING | STANDBY/ON | |
|
|
Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on headphones.
DO NOT turn off (on standby) the unit with the volume set to an extremely high level; otherwise, a sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source next time. REMEMBER you cannot adjust the volume level while the unit is on standby.
To turn down the volume level temporarily
Press FADE MUTING on the remote control. | FADE |
MUTING | |
The volume level gradually decreases to “VOL MIN.” |
|
To restore the sound, press the button again. |
|
