
Using Advanced Sound Options
Sound Mode Adjustments (Remote Control Only)
Note: If you do not use a center speaker, the monaural signals are only repro- duced if you select PHANTOM.
Center Mode Setting
The center mode setting affects the center channel’s bass signals. It operates only when you select the Dolby Pro Logic Surround or Dolby 3CH Logic mode. On the remote control, press SURROUND then CENTER MODE. Each time you press CENTER MODE, the setting changes: NORMAL, WIDE, PHANTOM, or
3chLOGIC.
NORMAL — For a small center speaker. The front left and right speakers play the
WIDE — For a medium or large center speaker. The center speaker plays the
PHANTOM — For no center speaker. All
3chLOGIC — For no rear speakers. The rear channel’s sound is sent to the front left and right speakers.
Test Tone
The test tone lets you balance the signal levels between all your speakers. To adjust the levels, see “Center Level” and “Rear Level.”
To turn on the test tone, select one of the surround sound modes (PRO LOGIC, THEATER 1, THEATER 2, or 3chLOGIC) then press SURROUND. Then press TEST TONE. The receiver sounds a
The center test tone sounds and Cch appears only when you select Normal, Wide, or 3CH Logic.
If you select 3CH Logic, the receiver sounds the
Press TEST TONE again to turn off this feature.
Note: Use the VOLUME control to adjust the overall sound level.
Center Level
Press – CENTER LEVEL + to adjust the center speaker sound level.
Rear Level
Press – REAR LEVEL + to adjust the rear speakers’ sound level.
22