Note: To briefly stop pro- grammed play, press PAUSE on the main system. appears on the display. To resume pro- grammed play, press PLAY ,
or CD on the remote control. disappears.
6.Programmed play automatically stops at the end of the last pro- grammed track. To stop the CD changer at any time during pro- grammed play, press and
release | STOP |
| , | or press CD | ||
| ||||||
|
| on | the remote | control. | ||
|
|
and the CD’s elapsed play time disappear from the display.
Notes:
•Press PLAY , or CD on the remote control, to play the pro- grammed sequence again.
•To replace a programmed track, with play stopped, press RECALL on the remote control until the memory position num- ber of the track you want to replace appears on the display. Press MEMORY on the remote control so the position number flashes, then repeat Steps
22
•To resume regular or random play after storing a programmed sequence, you must first erase the programmed sequence (see “Erasing a Programmed Se- quence”).
Reviewing a Programmed Sequence
To review a programmed sequence, while play is stopped, repeatedly press RECALL on the remote control. As you press it, the CD, track num- ber, and memory position of each stored track appears.
Erasing a Programmed Sequence
To erase an entire programmed se- quence while play is stopped, press
and hold STOP , or CD on the remote control, for at least 2 sec- onds. MEMORY disappears from the display.