RECORDING A
CASSETTE TAPE
The System 731 lets you record onto a cassette tape from the CD changer or the radio.
Note: You can also record from an additional audio source (see “Re- cording from an Additional Audio Source”).
Caution: Never try to force down RECORD after you remove an erase- protection tab from a cassette tape (see “Preventing Accidental Era- sure”). You might damage the tape mechanism.
Recording from a CD
Follow these steps to record from a CD onto a cassette tape.
1.Press CD. CD, the last selected CD number, and TRACK 1 appear on the display.
2.Load the CD(s) you want to record into the CD changer.
26
3.Load a blank cassette tape, or one you want to record over, into the cassette deck.
4.To record the tracks from all loaded CDs in order, press the DISC NUMBER of the first CD you want to begin recording, or press DISC then the number on the remote control.
To record only selected tracks or change the sequence of the tracks, you must first program the desired sequence.
5.To automatically start the CD and begin recording at the same time (synchronously), press RECORD. PLAY automatically locks down with RECORD, and
RECORD and appear. Then the first selected CD or pro- grammed track begins to play, its elapsed play time appears, and the tape begins recording.
Note: To briefly stop the tape while recording, press PAUSE. The button locks and the tape stops. Press PAUSE again to resume recording.