Optimus MD-1200 owner manual Effect Control Number

42-4041.fm Page 43 Tuesday, August 3, 1999 6:56 AM

Here is the data that can be sent and re- ceived with this keyboard and the corre- sponding control number.

Effect	Control
	Number
Bank Select	0, 32
Volume	7
Pan	10
Expression	11
Hold1 (Sustain)	64
Sostenuto	66
Soft Pedal	67
RPN (Registered Parameter	100/101
Number)
Data Entry	6/38

Use the Bank Select setting to select the MD-1200’s tone groups to be changed by the Program Number message.

•Bank 0 — 0 to 127 (General MIDI tones)

•Bank 1 — 128 to 159 (synthesized tones)

•Bank 2 — 160 to 167 (drum sets)

•Bank 3 — 168 to 199 (user tones)

Just before sending a Program Change message, send two Control Change messages with this data to the MD- 1200:

•Control Number = 0, Control Value = <bank number>

•Control Number = 32, Control Value

=0

For example, to select tone number 190 (user tone number 22), enter:

•Control Number = 0, Control Value = 3 (bank number for user tone)

•Control Number = 32, Control Value = 0

•Program Change = 22 (22nd tone in bank 3)

Note: Channel 10 is reserved for drum sounds only, so it is not necessary to send bank select data when changing tones.

RPN is used when combining multiple control changes. RPN (100 and 101) se- lects the parameter to control, and Data Entry (6 and 38) sets the contents of the parameter. On the MD-1200, RPN is used to set pitch bend range, transpose, and tune control from an external MIDI device.

All Sound Off forces all sound on the current channel to turn off, regardless of how the sound is being produced.

All Notes Off turns off all note data sent from an external device on the channel. The notes being sustained by the pedal continue to sound until the next pedal off signal is received.

Reset All Controllers initializes pitch bend and all other control changes.

43