Note: Press PAUSE on Deck 2 to temporarily stop recording. Press PAUSE again to resume recording.
6.When you are finished, press STOP/EJECT on Deck 2 to stop the tape. RECORD and PLAY release.
Note: The deck automatically stops when the tape reaches the end.
Dubbing (Copying) a
Cassette Tape
You can easily copy a tape by playing it in Deck 1 and recording it onto an- other tape in Deck 2.
Follow these steps to copy a cassette tape.
1.Load a blank tape, or one you want to record over, into Deck 2.
2.Load the tape you want to copy into Deck 1.
3.Set DUBBING MIC/NORM/HIGH to
NORM (to record at normal speed) or HIGH (to record at twice the normal speed).
4.Set TAPE (POWER OFF)/RADIO to TAPE (POWER OFF).
10
5.Press PAUSE then RECORD on Deck 2. RECORD and PLAY both lock down.
6.Press PLAY on Deck 1 to begin copying. PAUSE on Deck 2 auto- matically releases.
Notes:
•You can listen to the tape play- ing in Deck 1 as you copy it. Adjust VOLUME to the desired listening level. (Adjusting VOL- UME does not affect the record- ing level).
•The tape’s sound is distorted if you set DUBBING MIC/NORM/ HIGH to HIGH and listen to the tape playing in Deck 1 as you copy it.
•To temporarily stop recording on the tape loaded in Deck 2, press PAUSE on Deck 2. The tape in Deck 2 stops, and the tape in Deck 1 continues to play. Press PAUSE on Deck 2 again to resume recording.
