Optimus 32-3009, SSM-1250 owner manual Illustration of mixer back

32-3009.fm Page 5 Tuesday, August 10, 1999 8:31 AM

11 Mono/Stereo Selector — lets you set the output to stereo or monaural.

12Bass/Middle/Treble Controls — let you adjust the tone of the se- lected output to get just the right sound.

13Cue Assign Controls — lets you select the channel where the de- sired audio input source is located

illustration of mixer back

so you can monitor and prepare it before mixing it in.

14Cue/Program Control — lets you balance the volume of the output playing on the sound system and the input being prepared for mix- ing through the headphones.

15Lamp Jack — lets you connect a 12V DC lamp to light the mixer controls.

16Phones Jack — lets you connect a pair of stereo headphones with a 1/4-inch plug.

17Cue Level — lets you adjust the headphone’s volume level.

18Stereo Line Outputs — let you connect the mixer’s output to your receiver/amplifier and tape deck so you can play the sounds from your input sources through your speaker system, and record them.

19Stereo Line Inputs — let you connect most line-level audio sources such as a CD player, tape deck, tuner, camcorder, or VCR.

20Stereo Phono Inputs — for con- necting low-level audio sources, such as turntables with a magnet- ic cartridge.

21Microphone Input — lets you connect a low impedance micro- phone with a 1/4-inch plug instead of one with an XLR plug.

5