REPLACING THE FUSE
The mixer uses a fuse for protection from power surges and short circuits. If the mixer suddenly turns off and will not turn on, check the fuse. If neces- sary, replace the fuse with a
Follow these steps to replace the fuse.
1.Disconnect power from the mixer.
2.Using a Phillips screwdriver, un- screw the fuse compartment cap on the back of the mixer.
illustration
3.Remove the old fuse and insert the new one.
Caution: Make sure you replace the fuse only with another fuse of the same type and rating.
4.Replace the fuse compartment cap.
5.Reconnect power.
21