11
TUNER OPERATION1. Set TAPE/TUNER/CD to TUNER.
The system automatically tunes to
the station that was playing when
the system was turned off or when
it was last set to TUNER.
2. Set AM/FM to the desired band.
The selected band and the last
selected station in that band ap-
pear.
Notes:
• The system uses a built-in fer-
rite antenna for AM reception.
For the best AM reception, ro-
tate the system.
• For the best FM reception, fully
extend the FM antenna.
3. Press TUNING + or – to tune up or
down the selected band. The fre-
quency changes on the display.
You can also use automatic tuning
(see “Automatic Tuning” on
Page 12) or memory tuning (see
“Memory Tuning” on Page 12).
Notes:
•Set
FM STEREO/FM MONO to
FM STEREO to select stereo.
The FM STEREO indicator
lights when you receive an FM
broadcast in stereo.
• To improve reception for weak
FM stereo stations, set FM STE-
REO/FM MONO to FM MONO
(monaural). The sound is no
longer in stereo, but reception
should improve.
4. Adjust the volume and set X-BASS
and STEREO WIDE for the desired
sound.
show location of AM/FM button
show location of
TUNING buttons
show location of
FM STEREO/FM MONO
switch
13-1296.fm Page 11 Wednesday, July 14, 1999 7:16 PM