6
PREPARATION Note: Complete all other connections
before you connect the system to AC
power and turn it on.
CONNECTING THE
SPEAKERS
1. Press the red speaker terminal tab
labeled SPEAKER R on the
back of the system, put the
stripped end of the right speaker’s
striped wire into the terminal, then
release the tab.
2. Press the black speaker terminal
tab labeled SPEAKER R on the
back of the system, put the
stripped end of the right speaker’s
other wire into the terminal, then
release the tab.
3. Repeat Steps 1 and 2 to connect
the left speaker to the SPEAKER L
and
terminals.
show speaker connections
+
-
+-
CONNECTING TH E FM
ANTENNA
Press the black FM antenna terminal
tabs labeled FM ANTENNA on the back
of the system, put the stripped end of
the supplied FM antenna wires into
the terminals, then release the tabs.
CONNECTING TO
POWER
After you complete all other connec-
tions, plug the system’s power cord in-
to a standard AC outlet. STANDBY
lights.
Warnin
g
: To prevent el ectric shock,
the power cord plug’s blades are po-
larized and fit a polarized AC outlet
only one way. If you have difficulty in-
serting the plug, do not force it. Turn it
over and reinsert it.
show antenna terminals location
show STANDBY indicator lit
w/callout arrow
13-1296.fm Page 6 Wednesday, July 14, 1999 7:16 PM