14
CD PLAYER OPERATION

LOADING A CD

1. Set TAPE/TUNER/CD to CD.
2. Press OPEN/CLOSE to open the
CD compartment.
Note: The CD carousel has three
trays, each labeled with numbers,
but only two trays show at a time
when you open the CD compart-
ment.
3. Place a CD in either (or both) of
the exposed trays, label side up.
To load a CD in the third tray,
press
DISC SKIP. The carousel ro-
tates, exposing the other tray.
4. After you load the CDs, press
OPEN/CLOSE to close the CD
compartment. The system dis-
plays the current tray number, and
the number of tracks on that CD.
show location of OPEN/CLOSE
show location of DISC SKIP
Notes:
• Track number 00 and the current
tray number appear while the sys-
tem checks each tray.
• If the system finds an empty tray,
the tray number disappears and
the system checks the next tray.
• If the system finds a tray with a
CD, the tray number and the num-
ber of tracks on that CD appear.

SELECTING A CD

To select a CD, press DISC SKIP be-
fore or during play.
If the system is playing a CD, it stops
playing it and begins playing the first
track of the selected CD.
show display - disc 3, 10 tracks
13-1296.fm Page 14 Wednesday, July 14, 1999 7:16 PM