OPERATING THE MONITOR
1Press the ENTER Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the 
/ 
Buttons.
Main Menu
Auto Adjust
Luminance
Geometry
Color
OSD
Language
Recall
Miscellaneous
Input Select
2Select the Menu item which contains the adjustment icon relating to the adjustment you want to make. Press the ENTER Button. Then, use the 
/ 
Buttons to highlight the desired adjustment icon.
3Press the ENTER Button again. Use the 
/ 
Buttons to make the appropriate adjustment or setting.
4Press the EXIT Button to leave the menu, and the settings you just made would be automatically saved.
For example, to correct for vertical position, select Menu item of Geometry and then press the ENTER
Button. Then, select 
(V.Position) by using the 
/ 
Buttons.
Main Menu
Auto Adjust
Luminance
Geometry
Color
OSD
Language
Recall
Miscellaneous
Input Select
Geometry
H. Position | 50 |
|
|
V. Position | 50 |
Pixel Clock | 50 |
Phase | 50 |
An adjustment page appears after you press the ENTER Button. Then, use the 
/ 
Buttons to change the vertical position settings. The vertical position of the overall display should be changing accordingly while you are doing this.
Press the EXIT Button lastly, it ends, any changes are saved in the memory.
Geometry
V. Position
50
NOTE
When button operations are aborted during adjustment,
Any changes are automatically saved in the memory when the On Screen Display disappears. Turning off the power should be avoided while using the Menu.
Adjustments for H. / V. Position, Pixel Clock and Phase are saved for each signal timing. Except for these adjustments, all other adjustments have only one setting which applies to all signal timings.
Optiquest Q22wb | 11 |
