Optiquest VS11725 manual HOW to USE the Stand, Installation

HOW TO USE THE STAND

The monitor is shipped with the stand detached. Be sure to attach the stand before operating the display and remove if it is necessary to re-box.

CAUTION	 Install the Stand on a stable surface. The monitor may cause injury or damage if it falls
	or is dropped.
	 Do not give a strong impact to the monitor. It may cause damage.
	 Unplug the monitor before installation to avoid electric shock or damage.

<Installation>

1.Put a piece of soft cloth on the table beforehand to prevent the monitor from being

scratched. Lay the monitor flat on a table with front face down.

2.The Stand-Bottom is pulled up as shown in the figure.

3.Install the Stand-Base to the Stand-Bottom.

<Remove>

1.Put a piece of soft cloth on the table beforehand to prevent the monitor from being

scratched. Lay the monitor flat on a table with front face down.

2. Hold down the hooks outside and pull the Stand-Base away from the Stand-Bottom.

Optiquest Q22wb