4Push the release tab on the top of the hard drive bracket into the locked position (L).

5Replace the side panel. See page 99.

installing a second hard drive

Some PC models may have an empty bay to add a second hard drive. You must provide the drive and four 6/32 x ¼” screws (length of ¼-inch is 0.64 cm) to secure the drive to the chassis.

1Remove the side panel. See page 99.

2Remove the front panel. See page 100.

3Gently lay the PC on its side.

4See “removing the preinstalled hard drive” on page 107.

NOTE: You do not need to remove the preinstalled hard drive from the bracket when installing a second hard drive.

5Remove the two screws on the hard drive bracket (N).

N

O

P

6Slide the bracket away from the bottom of the chassis, and then pull it up and out of the chassis (O).

110user’s guide