7Remove the screw from each side of the drive cage to remove the 7-In-1 memory card reader.

Or

Remove the screw from each side of the drive cage to remove the diskette drive.

8Pull the drive out through the front of the drive cage.

installing the 7-in-1 memory card reader or the diskette (floppy) drive

1See “removing the 7-in-1 memory card reader or the diskette (floppy) drive” on page 105.

2Slide the replacement drive into the drive cage until the two screw holes on each side are aligned.

3Attach the screw on each side of the drive cage.

106user’s guide